技术 |
|
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3u 100Base-FX
IEEE802.3x flow control
|
|
|
Store and forward technology and with 3.2Gbps switch fabric |
|
|
|
| 界面 |
|
4 x 10/100 Base-TX withAuto MDI/MDI-X function,Auto-Negotiation
1 x 100Base-FX supports multi-mode or single mode fiber
|
|
|
10/100 Base-TX: RJ-45
100Base-FX: Duplex SC Power/Relay: 4-pin terminal block
|
|
|
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable.
The link distance is maximum 100 meters. Fiber: SC, multi-mode or single-mode
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um,.max. distance 30KM
|
|
|
JetNet 2005f-m, multi-mode fiber
Link Distance: 2KM (Max.)
Wave-length: 1310nm
MinTx Power:-19dBm
MaxTx Power:-14dBm
Min Rx Sensitivity:-30dBm
Link budget:11dBm
JetNet 2005f-s, single-mode fiber
Link Distance: 30KM (Max.)
Wave-length:1310nm
MaxTx Power:-8dBm
MinTx Power:-15dBm
Min Rx Sensitivity:-34dBm
Link budget:19dBm
|
|
|
DIP1~5: Enable or disable port link down alarm for RJ-45 port 1~4, Fiber port 5
On: 启动端口断连报警
Off: 关闭端口断连报警
|
|
|
System: Power (green), Fault (red on)
RJ-45port:100MbpsLink(greenon)/Activity(greenflashing)
10Mbps Link (yellow on)/Activity(yellow flashing)
|
|
| 电源要求 |
|
2 pins from 4-pin terminal block for DC or ACpower input.DC 18~32V with reverse polarityprotection.
AC 18~27V, 47~63Hz
|
|
|
|
| 机械规格 |
|
DIN-Rail mount or Wall Mount |
|
|
|
|
111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89mm (D) ( without DIN rail clip)
|
|
|
377g with package
295g without package
|
|
| 适用环境 |
|
|
|
|
|
|
|
1.5KV for all ports and power |
|
| 安规认证 |
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 |
|
|
|
|
|
|
|
|
|
|
713,506 Hours, MIL-HDBK-217F GB standard
|
|
|
|
